An old man named Daniel Baker, living near Lebanon, Iowa, was suspected by his neighbors of having murdered a peddler who had obtained permission to pass the night at his house. This was in 1853, when peddling was more common in the Wester... Read more of Present At A Hanging at Scary Stories.caInformational Site Network Informational
Privacy
     
Home - Carpentry - Woodworking - Wood Turning - Wood Handwork - Making Furniture

Tools Used








The back saw is used for cutting the tenon, and the end of the board appears as shown in the enlarged Fig. 34. Two things are now necessary to complete the tenons. On the upper or work edge of each board use the gage to mark off a half-inch slice, and then cut away the flat side of the tenon at the end, on its inner surface, so it will appear as shown in Fig. 35.
Fig. 36. Fig. 36.

Fig. 37. Fig. 37.






Next: Chamfered Tenons

Previous: The Tenons



Add to del.icio.us Add to Reddit Add to Digg Add to Del.icio.us Add to Google Add to Twitter Add to Stumble Upon
Add to Informational Site Network
Report
Privacy
SHAREADD TO EBOOK


Viewed 1756