Home-made Mission Book Rack

When making the book rack as shown in the accompanying photograph use quarter-sawed oak if possible, as this wood is the most suitable for finishing in the different mission stains. This piece of furniture is very attractive and simple to construct. The upper shelf can be used for vases or a plant of some kind, while the lower shelves afford ample room for books and magazines.

The slats and legs are fastened to the shelves with 2-in. round-headed brass screws. These can be purchased from any hardware store. One screw is used at each joint of a slat and shelf which calls for 32 screws in all. Holes should be bored into the slats and legs in which to insert the screws. This will keep the wood from splitting. The dimensions are given in the diagram sketch, although these may be changed to suit the requirement of the builder. If no glue is used on the joints when setting up, the rack can easily be taken apart and put in a small bundle for moving.

---

Next: How To Make A Mission Library Table
Previous: How To Make A Morris Chair

			Report Privacy
	SHARE	BOOKMARK

Viewed 260