Cross-cuts





The difference between a cross-cut and a rip saw is, that in the latter the teeth have less pitch and are usually larger than in the cross-cut saw. The illustrations (Figs. 13 and 14) will distinctly show the difference in the teeth. When a cross-cut saw is used for ripping along the grain of the wood, the teeth, if disposed at an angle, will ride over the grain or fiber of the wood, and refuse to take hold or bite into the wood. On the other hand, if the rip saw is used for cross-cutting purposes, the saw kerf will be rough and jagged.

Fig. 5. Fig. 5.


The back saw is used almost exclusively for making tenons, and has uniformly fine teeth so as to give a smooth finish to the wood.





Correct Way To Hold Tool For Grinding Cutting Out The Spaces facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback