As the saw is such an important part of the kit, I shall devote some space to the subject. First, as to setting the saw. The object of this is to make the teeth cut a wider kerf than the thickness of the blade, and thereby cause the saw to travel freely. A great many so-called "saw sets" are found in the market, many of them built on wrong principles, as will be shown, and these are incapable of setting accurately.

Fig. 10. Fig. 10a Fig. 10. Fig.10a.

Saddle Joint Shadows Cast By Moldings facebooktwittergoogle_plusredditpinterestlinkedinmail