The Flooring Joist





The flooring joists (A) are then put down (Fig. 230). These should extend clear across the house from side to side, if possible, or, if the plan is too wide, they should be lapped at the middle wall and spiked together. The ends should extend out flush with the outer margins of the sills, as shown, but in putting down the first and last sill, space must be left along the sides of the joist of sufficient width to place the studding.

Fig. 229. Fig. 229.


Fig. 230. Fig. 230.






The First Stroke The Foundation facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback