The Legs





Now prepare two legs (D) for the tail end of the frame, each 32 inches long, with a chamfer (5) at one end, and provided with four bolt holes. At the lower end bore a bolt hole for the cross base piece. This piece (E) is 4" × 4", 21 inches long, and has a bolt hole at each end and one near the middle. The next piece (F) is 2" × 4", 14½ inches long, provided with a rebate (6) at each end, to fit the cross gains (4) of the legs (C). Near the middle is a journal block (7).

Fig. 241. Frame details. Fig. 241. Frame details.






The Jack Plane The Length Of The Mortises facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback