The Tenons





Do not neglect first to select the work side and the working edge of the board. The outer surface and the upper edges are the sides to work from. The cheekpiece (A) of the gage must always rest against the working side.

The cross marks (B, C) should be made with the point of a sharp knife, and before the small back saw is used on the cross-cuts the lines (B), which indicate the shoulders, should be scored with a sharp knife, as shown in Fig. 33. This furnishes a guide for the saw, and makes a neat finish for the shoulder.

Fig. 33. Fig. 33.


























Fig. 34. Fig. 35.
Fig. 34. Fig. 35.








The Tail Stock The Tongue And Groove facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback