Cot Joint

At is shown an interesting joint used largely in the making of Indian cots. The illustrations indicate how the cross bar and end bar are mortised into the leg. A turned hardwood peg fits into a suitably provided hole and locks the tenons, which are dry jointed (not glued) in position. The head of this peg forms an ornament (A) at the top of the leg and should fit tightly in position. At B are seen the end and cross bars in their relative positions when apart from the leg. C shows the end bar and cross bar when the cot is fixed, but in this illustration the leg is purposely left out of the drawing for a clear representation. D shows the joints of the leg portion when the part of the leg above the line at A is sawn off. The hardwood peg is shown at E.

Fig. 347.—Fixing Muntin      to Skirting.

Fig. 347.—Fixing Muntin to Skirting.

Fig. 348.—Joint for      Home-made Cot.

Fig. 348.—Joint for Home-made Cot.

Corrugated Steel Fasteners Cross Puzzle facebooktwittergoogle_plusredditpinterestlinkedinmail