104 Pedestal
: HOW THE DIFFERENT STRUCTURAL PARTS ARE DESIGNATEDAn upright architectural member, A, right-angled in plan, constructionally a pier, but resembling a column, having a capital, shaft and base to agree with the columns in the structure.
More
-
Things To Avoid In Mortising
You must be careful to refrain from undercutting as your chisel goes down at the lines <em>a</em>, <em>b</em>, because if you commit this error you will make a bad joint. As much care should be exercised in producing the tenon, although the most com... Beginner Wood
In this place consideration will be given to some of the features relating to the materials to be employed, particularly with reference to the manner in which they can be worked to the best advantage, rather than to their uses. ... Drawing And Its Utility
A knowledge of drawing, at least so far as the fundamentals are concerned, is of great service to the beginner. All work, after being conceived in the brain, should be transferred to paper. A habit of this kind becomes a pleasure, and, if carried ou... House Building
House building is the carpenter's craft; cabinet-making the joiner's trade, yet both are so intimately associated, that it is difficult to draw a line. The same tools, the same methods and the same materials are employed. There is no trade more enno... How To Hold And Handle Tools
Observation may form part of each boy's lesson, but when it comes to the handling of tools, practice becomes the only available means of making a workman. Fifty years of observation would never make an observer an archer or a marksman, nor would it ... Tenoning Mortising Rabeeting And Beading
In the chapter on How Work is Laid Out, an example was given of the particular manner pursued in laying out mortises and tenons, and also dovetailed work. I deem it advisable to add some details to the subject, as well as to direct attention to some... The Carpenter And Architech
A carpenter has a trade; the architect a profession. It is not to be assumed that one vocation is more honorable than the other. A <em>profession</em> is defined as a calling, or occupation, "if not mechanical, agricultural, or the like," t... The Use Of Stains
As this subject properly belongs to the painter and decorator, it is not necessary to go into details concerning the methods used to finish off your work. As you may not be able to afford the luxury of having your productions painted or stained, eno... Things To Make
As stated in the Introductory, the purpose of this book is to show <em>how to do the things</em>, and not to draw a picture in order to write a description of it. Merely in the line of suggestion, we give in this chapter views and brief descriptions ... Tools And Their Uses
In the foregoing chapters we have referred the reader to the simple tools, but it is thought desirable to add to the information thus given, an outline of numerous special tools which have been devised and are now on the market. ... 100 Parquetry
A species of joinery or cabinet work, consisting of an inlay of geometric or other patterns, generally of different colored woods, used particularly for floors. ... 101 Peen Also Pein
The round, round-edged or hemispherical end, as at A, of a hammer. ... 102 Pendant
A hanging ornament on roofs, ceilings, etc., and much used in the later styles of Gothic architecture where it is of stone. Imitated largely in wood and plaster work. ... 103 Pentastyle
A pillar. A portico having five pillars, A, is called the Pentastyle in temples of classical construction. ... 104 Pedestal
An upright architectural member, A, right-angled in plan, constructionally a pier, but resembling a column, having a capital, shaft and base to agree with the columns in the structure. <div> <img src="/images/fig105_117.jpg" alt="Fig. 105.-Fig. 117.... 105 Pintle
An upright pivot pin, or the pin of a hinge; A represents the pintle of a rudder. ... 106 Portico
A colonnade or covered structure, especially in classical style, of architecture, and usually at the entrance of a building. ... 107 Plate
A horizontal timber, A, used as a top or header for supporting timbers, roofs and the like. ... 109 Quirk Molding
A small channel, deeply recessed, in proportion to its width, used to insulate and give relief to a convex rounded molding. An excellent corner post for furniture. ... 110 Re-entering
The figure shows an irregular polygon (that is, many-sided figure) and is a re-entering polygon. The recess A is a re-entering angle. ... 111 Rafter
Originally any rough and heavy piece of timber, but in modern carpentry used to designate the main roof support, as at A. See Queen Post. ... 112 Scarfing
Cutting timber at an angle along its length, as the line A. Scarfing joints are variously made. The overlapping joints may be straight or recessed and provided with a key block B. When fitted together they are securely held by plates and bolts. ... 113 Scotia Molding
A sunken molding in the base of a pillar, so called from the dark shadow which it casts. ... 114 Sill
In carpentry the base piece, or pieces, A, on which the posts of a structure are set. ... 115 Skew-back
The course of masonry, such as a stone, A, with an inclined face, which forms the abutment for the voussoirs, B, or wedge-shaped stones comprising the arch. ... 116 Spandrel
The irregular, triangular space, A, between the curve of an arch and the enclosing right angle. ... 117 Strut
In general, any piece of a frame, such as a timber A, or a brace B, which resists pressure or thrust in the direction of its length. <div> <img src="/images/fig118_123.jpg" alt="Fig. 118.-Fig. 123." title="" height="319" width="108"> </div> ... 118 Stud Studding
The vertical timber or scantling, A, which is one of the small uprights of a building to which the boarding or plastering lath are nailed. ...