The Bridle Joint
<p>A bridle joint is often defined as the reverse of a mortise and tenon, and is chiefly used in the carpentry and joinery trades. The name probably originated from the fact that it bears some resemblance to the manner in which a bit slips into the... The Dovetail Joint
<p>Nothing definite is known as to the origin of dovetailing, but a quaint and pleasing little story which is well worth repeating runs as follows: A farmer had called in the local "joyner" to do sundry repairs at the homestead. One day, whilst enjo... The Dowelling Joint
<p>Dowelling is the term generally given to the method of jointing timber and other materials by wooden or metal pegs, which are called dowels. For cabinet-making and similar work straight-grained beechwood dowels are mostly used; these may be bough... The Glued Joint
<p>The glued joint in its various forms is in use in every country in the world, and is frequently met with in mummy cases and other examples of ancient woodwork. Alternative names under which it is known are the butt joint, the rubbed joint, the sli... The Halved Joint
<p>T he halved joint is frequently known as half-lapping, and sometimes as checking and half-checking. In the majority of cases it is made by halving the two pieces, <em>i.e.</em>, by cutting half the depth of the wood away. There are, however, excep... The Hinged Joint
<p>One of the most common forms of hinged joint in use to-day is that formed by using the &quot;butt&quot; hinge, and many troubles experienced by the amateur, such as &quot;hinge-bound,&quot; &quot;stop-bound,&quot; and &quot;screw-bound&quot; doors... The Key Piece
When the writer fits up the puzzle he finds that three of the arms may straight away be fitted complete with their three cross parts. These are the ones where the longer cross piece <em>lies flush with the back of the central bar</em> . This is eas... The Mitred Joint
<p>Although mitreing is used in everyday woodwork, it comes last in our list of regular joints simply because it has been partly dealt with in almost every previous chapter. For example, we have mitre halving in , a mitre bridle joint in , a tongue... The Mortise And Tenon Joint
<p>A mortise and tenon joint is the method of joining timber by working a solid rectangular projection in the one piece and cutting a corresponding cavity to receive it in the adjoining piece. The projection is called the tenon, and the cavity the ... The Scarf Joint
<p>The method known as &quot;scarfing&quot; is used for the joining of timber in the direction of its length, enabling the workman to produce a joint with a smooth or flush appearance on all its faces. One of the simplest forms of scarfed joint is kn... The Tongued And Grooved Joint
<p>T he tongued and grooved joint is used in one form or another throughout the whole of the woodworking trades, covering, as it does, a great variety of work from the laying of flooring boards to the construction of dressers, bookcases and other ca... Through Dovetailing
One of the simplest forms of the dovetail joint is shown in , where two pieces of timber are joined by the method known as "through" dovetailing. This method is used in everyday practice for joining the corners of frames, bracket trusses, and a hundr... To Set Out A Curved Mitre
Draw a section of the moulding full size, A, as shown at the left hand of the illustration, and project lines round the framing, as shown V, W, X, Y and Z. Where the lines V, W, X, Y and Z intersect at the corner D, it clearly shows that a straight ... Tongueing
The grooves having been completed, the tongues have to be made. shows a sketch of a board and the method of marking out cross tongues (A) and feather tongues (B). The usual procedure for making cross tongues is to plane the end of the board and use... Tongueing Planes
shows the end view of a tongueing plane for working matched joints out of the solid. The method of holding and using the plane is similar to the directions given for using the plough. The part lettered F (in front) represents the fence, which in thi...

The Halved Joint The Bridle Joint The Scarf Joint Sawing Sawing Joints Other Than A Right Angle Supporting The Joint Wall Plugs

Stopped Hinged Joints For Box Work Hinged Cornice Poles Position Of Hinges Through Dovetailing Sawing The Dovetails Tenon With Tongued And Grooved Shoulders Acute Angle Hingeing Mortise And Tenon With Mitred Face