Wood Hand Tools
The hand tools in common use in woodworking shops may, for convenience, be divided into the following classes: 1, Cutting; 2, Boring; 3, Chopping; 4, Scraping; 5, Pounding; 6, Holding; 7, Measuring and Marking; 8, Sharpening; 9, Cleaning.
More
-
Principles Of Joinery
<p>Footnote 11: Professor Rankine's Five Principles:</p> <p>1. To cut the joints and arrange the fastenings so as to weaken the pieces of timber they connect as little as possible.</p> <p>2. To place each abutting surface in a joint as nearly as possi... Sawmilling
<p>The principal saws in a mill are of three kinds, the circular, Fig. 32, the gang, Fig. 33, and the band, Fig. 34. The circular-saw, tho very rapid, is the most wasteful because of the wide kerf, and of course the larger the saw the thicker it is an... Saws
<div><img src="/images/HandWork/086-350.png" alt="Fig. 86. Hand Saw." width="350" height="117"><br> <br> Fig. 86. Hand Saw.</div> <p>The object of the saw is to cut thru a piece of material along a determined line. Its efficiency depends upon ... Scraping Tools
<p>Scraping tools are of such nature that they can only abrade or smooth surfaces.</p> <div><a href="/images/HandWork/142-148-800.png"><img src="/images/HandWork/142-148-600.png" alt="Fig. 142. Auger-Bit-File. Fig. 143. Single-Cut Blunt, Flat, Bastard ... Screws
<p>(a) <em>Wood-screws</em>, Fig. 229, may be classified by the material of which they are made; as, steel or brass. Steel screws may be either bright,—the common finish,—blued by heat or acid to hinder rusting, tinned, or bronzed. Brass s... Seasoning
<p>The seasoning of wood is important for several reasons. It reduces weight, it increases strength, it prevents changes in volume after it is worked into shape, and it prevents checking and decay. Decay can also be prevented by submergence and buryin... Sharpening Tools
<p>The <em>grindstone</em> for woodworking tools is best when rather fine and soft. The grinding surface should be straight and never concave. The stone should run as true as possible. It can be made true by using a piece of 1" gas pipe as a truing to... Simple Or Unjoined Pieces
<p>Of these there are a number that are advantageous for the learning of tool processes; at the same time they give opportunity for expression in design, and when finished are of use.</p> <p>Examples are: key-boards, chiseling-boards, bread-boards, sl... Stains
<p>The function of stains is to change the color, and to enchance the grain and texture of the wood. Stains may be divided into four general classes, which are not, however, entirely distinct. (1) Oil stains, (2) Water stains, (a) made from anilines, ... The Care Of The Woodworking Shop
<p><em>The general arrangement of the room</em>. The important factors are the source or sources of light, and the lines of travel. The common arrangement of benches where two sides of the room are lighted, is shown in <em>a</em>, Fig. 238. By this ar... The Common Joints
<p>Wherever two or more pieces of wood are fastened together we have what is properly called joinery. In common usage the term indicates the framing of the interior wood finish of buildings and ships, but it is also used to include cabinet-making, whi... Types Of Wooden Structures
<p>The articles suitable to be made in wood with hand tools may for convenience be divided into four general classes: (1) Unjoined pieces; (2) board structures; (3) panel structures; (4) framed structures. A few illustrations of each class are given b... Wood Fastenings
<p>The following are the chief means by which pieces of wood are fastened together: nails, screws, bolts, plates, dowels, glue, hinges, and locks.</p> ... Wood Hand Tools
<p>The hand tools in common use in woodworking shops may, for convenience, be divided into the following classes: 1, Cutting; 2, Boring; 3, Chopping; 4, Scraping; 5, Pounding; 6, Holding; 7, Measuring and Marking; 8, Sharpening; 9, Cleaning.</p> ... Wood Measurements
<p>Lumber is a general term for all kinds of sawn wood. Logs may be sawn into timber, that is, beams and joists, into planks, which are 2" to 4" thick, or into boards which are from ¼" to 1¾" thick. These may be resawn into special sizes...