$400 Tool Equipment

INDIVIDUAL TOOLS.

/>

24	Manual Training School Benches, H. & S. "L," @ $8.50.	$204.00
24	Stanley Jack-Planes, No. 5, 14", @ $1.74 each.	41.76
24	Disston's Back-Saws, No. 4, 10", @ 93c each.	22.32
12	Buck Brothers' Firmer-Chisels, No. 2, ¼", handled and sharpened.	2.21
12	Buck Brothers' Firmer-Chisels, No. 2, ½", handled and sharpened.	2.68
24	Buck Brothers' Firmer-Chisels, No. 2, 1", handled and sharpened.	7.31
24	Sloyd Knives, No. 7, 2½".	6.50
12	Hammond's Adze-eye Claw-Hammer, No. 3, 7 oz.	4.90
24	Try-squares, No. 5½, 6".	5.32
24	Beech Marking-Gages, No. 64½.	4.86
24	Boxwood Rules, No. 3, 12" long.	1.80
12	Faber's Measuring Compass, No. 1752.	1.50
12	Bench-Hooks.	2.00
12	Bench-Dusters, No. 10.	2.70
	Total for individual tools.	$309.86
GENERAL TOOLS
6	Disston's Crosscut-Saws, No. 7, 22", 10 points.	$ 6.75
6	Disston's Rip-Saws, No. 7, 22", 8 points.	6.75
2	Turning-Saws in frames, 14", M. F. & Co.	1.74
1	Dozen Turning-Saw Blades, 14", H. S. & Co.	1.06
1	Hack-Saw Frame, No. 50.	.45
1	Disston's Dovetail-Saw, 6", iron back.	.48
1	Stanley Miter-Box, No. 240.	8.20
2	Stanley Block-Planes, No. 65½.	1.56
1	Stanley Fore-Plane, No. 6.	2.22
1	Stanley Rabbet-Plane and Filletster, No. 78.	1.10
1	Stanley "Bed Rock" Plane, No. 603.	1.58
6	Iron Spokeshaves, No. 54.	1.42
1	Veneer-Scraper, No. 80.	.70
6	Each Molding-Scrapers, No. 2 and No. 7.	.90
1	Scraper Steel, Richardson's.	.10
3	Flat Bastard Files, K. & F., 8", handled.	.45
3	Half-Round Files, K. & F., 8", handled.	.55
3	Rat-tail Files, K. & F., 8", handled.	.33
4	Files, K. & F., 6", slim taper.	.36
1	Auger-Bit-File.	.13
1	File-Card, No. 1.	.14
1	Empire Tool-Grinder.	2.80
1	Grindstone, No. 11, with stone.	15.00
1	India Oilstone, No. 0, in box.	.95
1	Soft Arkansas Oil Slipstone, No. 6.	.18
1	Copperized Steel Oiler, No. 14A, ½ pint.	.23
2	Disston's Sliding T Bevel, No. 3, 6".	.46
1	Stanley Miter-Square, No. 16, 10".	.60
1	Sargent Steel Square, No. 2.	.69
1	Pair Starrett's Winged Dividers, No. 92, 8".	.75
1	Chisel, No. 2, ⅛", handled.	.20
3	Buck Brothers' Firmer-Gouges, No. 8, 1".	1.29
1	Buck Brothers' Gouge, No. 10, inside bevel, regular sweep, ¾".	.43
4	Barber's Braces, No. 14, 6" sweep.	3.52
1	Barber's Ratchet-Brace, No. 31, 12" sweep.	1.62
5	Gimlet-Bits, 1 each of 2⁄32", 3⁄32", 4⁄32", 5⁄32", 6⁄32".	.40
1	Set Auger-Bits, R. Jennings'.	4.46
1	Clark's Expansive-Bit, small.	.57
2	Screwdriver-Bits, ½", round blade, No. 10, 4".	.32
3	Rose Countersinks, No. 10, ⅝".	.68
6	Brad-Awls, assorted 1"-1½".	.30
1	Hand-Drill, No. 5½.	2.45
	Extra Drills, 2 each of No. 107, size, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60.	1.42
6	New Century Screwdrivers, 4".	.96
1	New Century Screwdriver, 12".	.54
6	O. K. Nailsets, assorted.	.42
6	Carpenter's Steel Bar Clamps, 3 ft.	9.60
12	Aldrich's Oiled Handscrews, No. 16, 10".	4.79
12	Aldrich's Oiled Handscrews, No. 17½, 6".	3.42
4	Carriage-Maker's Clamps, 6".	1.32
1	Automatic Miter-Clamp.	1.80
1	Pair Pliers, No. 200, 5".	.21
1	Coe's Monkey-Wrench, 10".	.60
1	Glue-Pot, No. 3.	.82
1	Parker's Wood-working Vise, No. 276.	8.07
1	Gas Stove, 99A.	.55
1	Pair End-Cutting Nippers, No. 154, 5".	.88
1	Glass-Cutter, No. 10.	.27
3	Flat Varnish Brushes, No. 54, 1½", hard-rubber-bound (for shellac).	.96
6	Cheap Brushes, 1", tin-bound (for stains), "EE".	.90
6	Extra Jack-Plane Cutters (No. 5).	1.80
6	Enamel Cups, ½ pint.	.60
1	Maple Yard-Stick, No. 41.	.17
	Total for general tools.	$114.97
	Total for individual tools.	309.86
		$424.83
	Discount for schools, 10 per cent.	42.48
		$382.35
	Lockers for individual work.	$150.00
$750 TOOL EQUIPMENT
INCLUDING 1 BENCH AND SET OF TOOLS FOR INSTRUCTOR AND INDIVIDUAL TOOLS
25	Manual Training School Benches, Hammacher, Schlemmer & Co.'s "J" with Toles' quick-acting Vise on side, @ $20.	$500.00
25	Stanley Jack-Planes, No. 5, 14", @ $1.74 each.	43.50
25	Disston's Back-Saws, No. 4, 10", @ 93c each.	23.25
25	Buck Brothers' Firmer-Chisels, ¼", handled and sharpened, @ $2.21 doz.	4.61
25	Buck Brothers' Firmer-Chisels, ½", handled and sharpened, @ $2.68 doz.	5.58
25	Buck Brothers' Firmer-Chisels, 1", handled and sharpened, @ $3.65.	7.61
30	Sloyd Knives, No. 7, 2½" blade (6 extra) @ $3.25 doz.	8.12
25	Hammond's Adze-eye Hammers, No. 3, 7 oz., @ $4.90 doz.	10.21
25	Round Hickory Mallets, No. 4, @ $1.40 doz.	2.91
25	Hardened Blade Try-Squares, No. 5½, 6", @ $2.66 doz.	5.57
25	Beech Marking-Gages, No. 64½, 8", @ $2.43 doz.	5.07
25	Steel Bench-Rules, No. 300D, @ $4.80 doz.	10.00
36	Faber's Measuring Compass, No. 1752 (12 extra).	4.50
25	Maple Bench-Hooks, @ $2.00 doz.	4.18
25	Bench-Dusters, No. 10, @ $2.70 doz.	5.63
	Total for individual tools.	$640.74
GENERAL TOOLS
6	Disston's Crosscut-Saws, No. 7, 22", 10 points.	$ 6.75
6	Disston's Rip-Saws, No. 7, 22", 8 points.	6.75
4	Turning-Saws in frames, 14".	3.48
1	Doz. Turning-Saw Blades, 14".	1.06
1	Compass-Saw, Disston's No. 2, 10".	.27
1	Stanley Miter-Box, No. 240.	8.20
1	Disston's Dovetail-Saw, 6", iron back.	.48
2	Coping-Saws, No. 110.	.40
1	Gross Coping-Saw Blades, 6".	1.00
6	Stanley Block-Planes, No. 65½.	4.68
1	Stanley Fore-Plane, No. 6.	2.22
1	Stanley Rabbet-Plane and Filletster, No. 78.	1.10
2	Stanley's "Bed Rock" Smooth-Planes, No. 603 or Sargent's Adjustable-Frog Smooth-Plan.	3.16
12	Extra Jack-Plane Cutters (No. 5), 2".	3.60
1	Stanley Beading Rabbet, and Matching Plane, No. 45.	5.85
1	Stanley Router-Plane, No. 71.	1.37
6	Iron Spokeshaves, No. 54.	1.42
6	Pattern-Makers' Spokeshaves, applewood, small, 1½".	1.52
2	Drawing-Knives, White's No. 31, 6".	1.60
1	Stanley Adjustable Scraper-Plane, No. 112, with toothing cutter.	1.43
1	Veneer-Scraper, No. 80.	.70
3	Each Molding-Scrapers, No. 2, No. 7.	.45
2	Dowel-Pointers, No. 1.	.60
1	Dowel-Plate.	.30
1	Scraper Steel, Richardson's.	.10
1	Iron Screw-Box, French, ⅜".	1.80
4	Flat Bastard Files, K. & F., 8", handled.	.60
4	Half-Round Files, K. & F., 8", handled.	.72
4	Rat-tail Files, K. & F., 8", handled.	.44
4	Files, 6", slim taper.	.36
2	Auger-Bit-Files.	.25
1	File-Card, No. 1.	.14
1	Empire Tool-Grinder.	2.80
1	Grindstone, No. 11, (iron frame and stone).	15.00
2	India Oilstones, No. 29 (medium), in iron box.	1.34
1	Soft Arkansas Oil Slipstone, No. 6.	.18
2	Copperized Steel Oilers, 14A, ½ pint.	.46
6	Disston's Sliding T Bevels, No. 3, 6".	1.38
1	Stanley Miter-Square, No. 16, 10".	.60
1	Sargent Steel Square, No. 2.	.60
2	Pairs Dividers, Starrett's winged, No. 92, 8".	1.50
3	Scratch-Awls, Collier's, 4".	.33
1	Pair Trammel-Points, No. 1.	.74
1	Try-Square, No. 5½, 12", hardened blade.	.52
1	Mortise-Gage, No. 77.	.55
1	Cutting-Gage, No. 70.	.17
3	Each Firmer-Chisels, Buck Bros.' No. 2, handled and sharpened; 1⁄16", ⅛", 3⁄16", ⅜", ¾", 1½".	4.42
3	Each outside-Bevel Gouges, Buck Bros.' Firmer, No. 8 handled and sharpened: ¼", ½", ¾", 1".	3.55
3	Addis' Carving-Tools, round maple handles, No. 11, 5⁄32".	.96
3	Addis' Veining-Tools, round maple handles, No. 11, 1⁄16".	.96
3	Inside-Bevel Gouges, regular sweep, No. 10, ¾".	1.29
6	Barber's Nickel-Plated Braces, No. 14, 6" sweep.	5.25
1	Barber's Ratchet-Brace, No. 31, 12" sweep.	1.62
3	Each German Gimlet-Bits, 2⁄32", 3⁄32", 4⁄32", 5⁄32", 6⁄32".	1.00
3	Each Russell Jennings' Auger-Bits, 3⁄16", 4⁄16", 5⁄16", 6⁄16", 7⁄16", 8⁄16".	4.18
2	Each Russell Jennings' Auger-Bits, genuine, 10⁄16", 11⁄16", 12⁄16", 13⁄16", 14⁄16", 15⁄16", 16⁄16".	6.19
1	Each Foerstner's Auger-Bits, ¼", ⅜", ½".	1.79
1	Clark's Expansive-Bit, ½" to 1½".	.57
3	Buck Bros.' Rose Countersinks, No. 10, ⅝".	.78
1	Washer-Cutter, No. 350.	.65
1	Plug-Cutter, ⅜".	.32
2	Screwdriver-Bits, ½", round blade, 4" long.	.32
4	Each Brad-Awls, handled, 1", 1¼", 1½".	.60
6	New Century Screwdrivers, 4".	.96
1	New Century Screwdriver, 12".	.54
1	New Century Screwdriver, 8".	.36
1	New Century Screwdriver, 3½", slim.	.16
1	Dowel-Plate, cast steel.	.30
6	O.K. Nailsets, assorted 1⁄16", 3⁄32", ⅛".	.42
6	Carpenter Steel Bar Clamps, 3 ft.	9.60
2	Carpenter Steel Bar Clamps, 5 ft.	3.60
12	Aldrich's Oiled Handscrews, No. 16, 10".	4.79
12	Aldrich's Oiled Handscrews, No. 17½, 6".	3.42
4	Carriage-Makers' Clamps, 6".	1.32
1	Automatic Miter-Clamp.	1.80
2	Doz. Acme Pinch-Dogs, ¾".	.30
1	Glue-Pot, No. 3.	.82
1	Gas Stove, No. 99A.	.55
1	Coe's Monkey-Wrench, 10".	.60
1	Glass-Cutter, No. 10.	.27
6	Flat Varnish Brushes No. 54. 1½", hard-rubber-bound (for shellac).	1.58
12	Cheap Brushes, tin-bound, (for stains), EE, 1".	1.80
6	Enameled Cups, ½ pint.	.60
1	Maple Yard-Stick, No. 41.	.17
1	Pair Blackboard Compasses or Dividers.	1.50
1	Blackboard Triangle, 45°.	.50
1	Blackboard Triangle, 30° × 60°.	.50
	Total for general tools.	$189.83
METAL WORKING TOOLS
1	Bench, No. 1, without vises.	$ 8.00
1	Parker's Wood-working Vise, No. 276.	8.07
1	Hand-Vise, No. 1230½, 4".	.54
1	Hay-Budden Anvil, 10 lb.	3.07
1	Riveting-Hammer, Atha, 4 oz.	.32
1	Rivet-Set, No. 4.	.27
1	Cold-Chisel, ⅜" cutting edge.	.11
1	Cold-Chisel, ⅝" cutting edge.	.15
1	Cape-Chisel, ⅜" cutting edge.	.13
1	Round-nosed Chisel, ⅜".	.13
1	Pair End-Cutting Nippers, No. 154, 5".	.88
1	Pair Compton's Metal Snips, No. 12, 2".	.63
2	Pair Flat-nose Pliers, No. 1806½, 5".	.58
1	Die-Holder, No. 11.	.32
1	Die, ⅝" × ¼", 6⁄32".	.27
1	Hand-Drill, No. 5½.	2.45
	Extra Drills, Morse's No. 107, 2 each, Nos. 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60.	1.42
1	Metal Countersink, No. 15, ⅝".	.18
1	Hack-Saw Frame, No. 50.	.45
6	Hack-Saw Blades, 8", H. S. & Co.	.25
1	Melting Ladle, 3".	.19
1	Soldering Copper, 1 lb.	.31
1	Mill Bastard File, 8", 1 safe edge, handled. }
1	Mill Smooth File, 6", handled.                    }
1	Square Bastard File, 8", handled.               }
1	Half-round Bastard File, 8", handled.         }
1	Slim Taper Saw-File, 6", handled.               }
1	Round Bastard File, 4", handled.                }	.85
1	Atha Machinist's Hammer, Ball-peen, 6 oz.	.38
	Total for metal working tools.	$29.95
	Glue and Stain Bench.	$ 15.00
	Lockers for individual work for 360 pupils.	360.00
	Nail and Screw Cabinet.	35.00
		$410.00
	Individual Tools.	$640.74
	General Tools.	189.83
		$830.57
	Discount for schools, 10 per cent.	83.06
	Cabinets, lockers, etc.	$747.51
		410.00
		$1,157.51